- Online only
- Weight [kg].
- 13
- Dimensions (L x W x H) [cm].
- 495 x 210 x 330
- Welding/cutting/other methods
- Soldering, MIG/MAG, MMA DC, TIG Lift (by rubbing) DC.
- Supply voltage [V].
- AC 230
- Features
- 2T/4T, Arc Force, Fan Stop, Hot Start, Microcontroller (MCU), Spool Gun option, 2-roll feeder, MIG gas feed, Feeder access speed, Inductance control, Gasless welding,
- Network protection [A].
- 25
- Warranty period for companies [years].
- 1
- Roll dimensions [mm].
- 30x10x10
- Manufacturing technology
- IGBT
- Max MMA welding current [A].
- 180
- Max MIG/MAG welding current [A].
- 200
- MMA duty cycle [%].
- 30
- TIG duty cycle [%].
- 30
- No-load voltage [V].
- 54
- Feeder arrival speed
- 3 - 6
- MIG welding voltage [V].
- 16,5 - 24
- MIG gas flow [s].
- 0,1-2
- Max MMA power consumption [kVA}
- 8,5
- Max TIG power consumption [kVA].
- 8,5
- Max MIG/MAG power consumption [kVA].
- 8,5
- Max MMA current consumption [A].
- 40
- Max TIG current consumption [A].
- 29
- Wire spool diameter ø [mm].
- 100, 300
- Main method
- MIG/MAG
- MIG/MAG duty cycle [%].
- 30
- Wire feed speed [m/min].
- 2 - 12,8
- Max MIG/MAG current consumption [A].
- 39
- Max DC TIG welding current [A].
- 200
- Welding voltage correction
- -5 - +5
- Serial No.
- Tak
Sinerginis suvirinimo aparatas Sherman Digimig 205 LCD synergic
Description
The DIGIMIG 205 LCD SYNERGIC welder is used for manual welding of steel and non-ferrous metals. It can also be used for brazing thin (up to 3 mm) galvanized sheets.
Capable of welding with MMA (covered electrode), TIG Lift (with arc ignition by rubbing), and MIG methods. The MIG method can be used in manual and synergistic modes, simplifying its operation.
Thanks to changing polarity, the device allows MIG welding with both standard shielded gas wires and self-shielded powder wires.
Digital control allows full adjustment of parameters, arc dynamics and characteristics. The use of synergistic settings for carbon steel, and aluminum in the welder greatly simplifies its operation and allows use by people with less experience and hobbyists.
Welders with less experience are also able to use the machine for welding.
Welders with less experience are also able to use the machine for welding.
During MMA welding, you can adjustthe HOT START, ARC FORCE functions and turn off VRD.
The device has a memory of the last setting, that is, when it is turned off and turned on again, the last set parameters are restored. Thanks to the Fan Stop function that turns off the fan when the welder is at low load, the noise level has been significantly reduced.
The noise level has been significantly reduced.
The set includes a MIG chuck, ground wire and electrode wire.
EquIPMENTS INCLUDED
Welding clamp TW-15/3m
Electrode cable
Ground cable