- Weight [kg].
- 15
- Dimensions (L x W x H) [cm].
- 490 x 220 x 375
- Welding/cutting/other methods
- Soldering, MIG/MAG, MMA DC, TIG Lift (by rubbing) DC.
- Supply voltage [V].
- AC 230
- Features
- 2T/4T, 36V AC power socket, Hot Start, Microcontroller (MCU), Setting memory, 2-roller feeder, Dual pulse, MIG gas supply, Pre-pulse, MIG pulse, TIG pulse, Induction control
- Warranty period for companies [years].
- 1
- Roll dimensions [mm].
- 30x10x10
- Manufacturing technology
- IGBT
- Max MMA welding current [A].
- 180
- Max MIG/MAG welding current [A].
- 200
- MMA duty cycle [%].
- 60
- TIG duty cycle [%].
- 60
- No-load voltage [V].
- 69
- Feeder arrival speed
- 1-15
- MIG welding voltage [V].
- 17,5 - 28
- Gas pre-flow [s].
- 0 - 10
- MIG gas flow [s].
- 0,1-50
- TIG pulse frequency [Hz].
- 0,1 - 99
- MIG pulse frequency [Hz].
- 0,5 - 5
- TIG pulse width [%].
- 5-95
- MIG pulse width [%].
- 20-80
- MIG spot welding time [s].
- 0,1-9,9
- Wire burning time [s]
- -50 - +50%
- Max MMA power consumption [kVA}
- 7,7
- Max TIG power consumption [kVA].
- 7,7
- Max MIG/MAG power consumption [kVA].
- 7,7
- Max MMA current consumption [A].
- 26
- Max TIG current consumption [A].
- 26
- Wire spool diameter ø [mm].
- 100, 200
- Main method
- MIG/MAG
- MIG/MAG duty cycle [%].
- 60
- Max MIG/MAG current consumption [A].
- 26
- Max DC TIG welding current [A].
- 180
- Welding voltage correction
- -50 - +50%
- MIG pulse amplitude [%]
- 5-50
- Amplitude of pulse TIG [%]
- 1-500
Synergic inverter welder DIGIMIG 210 TWINPULSE
Description
The DIGIMIG 210 TWINPULSE welding machine is used for manual welding of carbon and stainless steels and non-ferrous metals. It allows welding by MMA (shielded electrode), TIG Lift, MIG/MAG and brazing methods. The MIG/MAG method can be used in manual and synergistic modes. The device has synergy programs for carbon steel, stainless steel, aluminum alloys and copper alloys.The polarity change plug allows MIG/MAG welding with both standard shielded gas wires and self-shielded powder wires (without gas). The use of pulse or double pulse allows you to achieve better weld quality, high aesthetics with very high productivity.The digital control allows you to fully adjust the parameters, arc dynamics, characteristics and mode of the welder.
The device has the ability to store 36 sets of welding parameters. Thanks to the Fan Stop function that turns off the fan when the welder is under low load, the noise level has been significantly reduced.
The welder is equipped with an LCD display with selectable menus in 10 languagesincluding Polish, English, German and Spanish.
The device is configured at the factory for welding steel, and includes a Teflon cartridge and a roll for welding aluminum. Also includedarea MIG welding chuck, electrode cable, ground cable, and welding disc and hammer.
Equipment included
Welding clamp TW-24/3m
Mass cable
Electrode cable
Teflon blue MIG/MAG cartridge 3m
Blue coated steel cartridge 3m
Welding disc
Brush hammer