Suvirinimo aparatas EVERLAST Power PRO 205Si

GARANTIJA VARTOTOJUI

  • Kokybės garantija
  • 24 mėnesių garantija fiziniams asmenims
  • Nemokama konsultacija
  • Kokybės garantija
  • 24 mėnesių garantija fiziniams asmenims
  • Nemokama konsultacija

Suvirinimo aparatas EVERLAST Power PRO 205Si

1056613
1 549.00 €

Aprašymas

A reliable machine for both enthusiasts and professionals. The machine is a 400V 3-phase and is therefore suitable for the field even if long hangs are used and the electricity is of poor quality.

Thanks to the pilot arc ignition, cutting is easy even for a beginner, and even tight spaces are out of reach.

The machine can be upgraded with a Trafimet A81 burner, which is more suitable for professional use due to its durable materials.

The  PowerPRO 205Si from Everlast is designed to be just that unit.  With 200 amp TIG, 160 amp  Stick and 50 amp Plasma cutter capabilities, the digitally controlled IGBT Inverter welder/cutter is an all-in-one solution that is useful in many situations where space and portability are key concerns.  The flexibility and versatility that the multi-process PowerPro 205S offers is hard to beat. Stable arc performance helps both hobbyists and professionals to make quality repairs in the field or in the fab shop.   The TIG pulse capability further extends the unit’s capabilites, as well as the fully adjustable AC Frequency and AC balance which improves aluminum welding capabilities.  The PowerPRO 205Si multi-unit is definitely the utility player in Everlast’s lineup and is ready to go to work anywhere it is needed.

A reliable machine for both enthusiasts and professionals. The machine is a 400V 3-phase and is therefore suitable for the field even if long hangs are used and the electricity is of poor quality.

Thanks to the pilot arc ignition, cutting is easy even for a beginner, and even tight spaces are out of reach.

The machine can be upgraded with a Trafimet A81 burner, which is more suitable for professional use due to its durable materials.

Recommended Areas of Use:
  • Farm/Ranch where portable repairs are needed and carrying multiple units is not an option
  • Motorsports/At the track/Offroad where quick repairs are often needed
  • For businesses that often need spot repairs and one-off projects completed
Recommended Metals:
  • Steel
  • Stainless
  • Aluminum
  • Titanium
  • Virtually any weldable metal

TECHNICAL DATA

IGBT Inverter Type: IGBT
Voltage/phase: 380 V 3 Phase
TIG output type: AC/DC
TIG Start Type: High Frequency Only
Pulse: Yes, Adjustable
Plasma Cutter Arc Start Type: Blow Back (Piston type)
PilotArc: Yes
OK-to-Cut Indicator/Low Air pressure safety: Yes
AC Frequency: 20-250Hz
AC Balance (cleaning): 10-90%
OCV: 85V TIG/Stick, 250V Plasma
Max Inrush ( I1MAX ) Amps: 30A
Maximum Rated (I1EFF ) Input Amps: 24A
TIG Output Amps/Volts @ Rated Duty Cycle: 
  • 200A/18V @ 60% Duty Cycle
  • 160A/16.4V @ 100% Duty Cycle

Stick Output Amps/Volts @ Rated Duty Cycle: 

  • 160A/26.4V @ 35% Duty Cycle
  • 130A/25.2V @ 60% Duty Cycle
  • 100A/ 24V @ 100% Duty Cycle
Plasma Output Amps/Volts @ Rated Duty Cycle:
  • 50A/100V @ 35% Duty Cycle
  • 40A/96V @ 60% Duty Cycle
  • 30A/92V @ 100% Duty Cycle
TIG AC Amp/Volt Range: 20A-200A; 10.8V-18V
TIG DC Amp/Volt Range: 5A-200A; 10.2V-18V
Stick Amp/Volt Range: 5A-160A; 20.2V-26.4V
Plasma Amp/Volt Range: 20A-50A; 88V-100V
Start Amps: 
  • DC: 5A-200A
  • AC: 20A-200A
End Amps:
  • DC: 5A-200A
  • AC: 20-200A
Down Slope Time: 0-25 Seconds
Up Slope Time: 0-10 Seconds
Preflow time: 0-10 Seconds
Post Flow Time: 0-25 Seconds
OverCurrent Protection: Yes
Duty Cycle Protection: Yes
Air Pressure OK Safety Indicator: Yes
TIG Pulse Frequency: .5-250 Hz
TIG Pulse Time On: 10-90%
TIG Pulse Amp Range: 5-95%
Stick Arc Force Control: Yes, 10-100%
Torch Type: PT/iPT 60
Recommended Cutting Air Pressure: ~200L/min 4,5-5 bar
Dimensions: 56 cm × 23 cm × 43 cm
Weight: 28 kg
 
 
PRODUCT NOTES

This unit is not designed or intended for Industrial fabrication or production welding. It is not designed for CNC use or for production plasma cutting.

If used with a generator, the generator must be rated by its manufacturer as “clean power” which is 5% or less THD.  Use with generators that are rated for 9000 watts or greater for best operation.

 

MINIMUM/MAXIMUM

TIG single pass capability

  • Steel: 36 ga. – 3/8″
  • Aluminum: 24 ga. – 1/4″

Stick electrode diameter capability

  • 1/16″-1/8″

Plasma Cutting capability* (with dry air, new consumables, proper air pressure etc.)

  • up to 1/2″ daily use @ 15-20 ipm
  • up to 5/8″ clean cut @ 8-12 ipm
  • up to 3/4″ severance cut @ 3-5 ipm

*Quality and capacity of cut depends upon consumable orifice size, standoff height, travel speed, etc.

 

Apie Everlast Power Equipment Inc.



Svarbu

ce_mark.svg

CE ženklinimas yra prekės gamintojo deklaracija, kad produktas atitinka jam taikomus Europos Komisijos direktyvų reikalavimus (plačiau skaitykite čia).

Prekių nuotraukos bei video skirtos tik iliustraciniams tikslams. Originalių produktų parametrai, spalvos, užrašai, matmenys, dydžiai, funkcijos, ir/ar bet kurios kitos savybės dėl savo vizualinių ypatybių gali atrodyti kitaip negu realybėje, todėl prašome vadovautis prekių savybėmis, kurios nurodytos prekių aprašymuose. Vizualinė prekių medžiaga nenurodo prekių komplektacijos, todėl būtina vadovautis prekės aprašyme ir specifikacijose pateikta informacija.

Kilus klausimams, lauksime Jūsų skambučio telefonu +370 648 47770 arba žinutės el. paštu [email protected]

Kitos prekės toje pačioje kategorijoje (16):

Atsiliepimai Visi atsiliepimai

Rūšiuoti pagal

Reikia patarimo?

+370 648 47770

arba el. paštu: [email protected]

SUVIRINIMO ĮRANGA KAUNE

PARDUOTUVĖ

Raudondvario pl. 141, Kaunas

I - V:  8.00 - 17.00

VI: 10.00 - 14.00

Prekė priskirta prie patikusių sąrašo
Prekė pridėta palyginimui.